Nextel comm Modem IR1200 User Manual download pdf (Page 87)

AT Commands

RFM-4002-5015 Rev 3

38400 = Transmission speed in bits per second.

57600 = Transmission speed in bits per second.

115200 = Transmission speed in bits per second.

Lock/Unlock the DCE

When the DCE is locked, communication over the serial port to the modem is

suspended.

NOTE: If the PIN was removed (by setting its value to the empty string

(“ ”), the DTE must still specify the PIN, represented by the

empty string.

Command +WCLK

Action AT+wclk=<LockStatus>, <PIN>

Query

Range AT+WCLK=?

Parameter

Values –

Lock

Status:

0 = Unlock the DCE

1 = Lock the DCE

A PIN is stored as a series of alphanumeric characters,

with a maximum length of 8 characters. If more than 8

characters are set as a PIN, only the first 8 are

recognized.

Change the DCE’s PIN.

This command sets the PIN that locks or unlocks the DCE.

NOTE: You must specify the desired PIN, as well as the current PIN.

The factory-default PIN is the “empty string” or a value of “ ”.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 121 122

No comments

Nextel comm Modem IR1200 User Manual Page 87